|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
Specifications |
|
| Cord Types and Lengths: | The controller power and socket cords are made of heavy duty, 18 gauge, water resistant, grounded cable. Each side is 36 inches. The float switch cords are about 20 inches long. |
| Float Switch Type and Information: | Madison M8000. Switches are saltwater safe and have no metal parts. Floats are 1" wide and fit into 1.25" PVC pipe. |
| Mount Information: | Made from black plastic. 4" wide and 6" total length. Each switch
is held secure by two zip ties. In addition two nylon screws hold the mount
secure to your tank. Our new smaller profile snail guards are included (old style snail guards are pictured). Snail guards will prevent aquarium inhabitants from interfering with the operation of the float switches. |
| Switching System Information: | Switching system is done by a 15 Amp relay, allowing you to use a device rated up to 1800 watts. |
| Water Level Height: | The water level is adjustable from approximatly 1" to 3" below tank lip depending on where you attach the switches to the mount using the provided zip ties. |
| Operation: | The controller powers a device when the lower float switch senses that your tank water level is low. The device will be turned off when the lower float switch senses your water level is high. The top switch is a backup in case the bottom switch fails. |
Double
Switch - Tank Mount |
|