|
|
|
Nano
Nano float switch is small which saves valuable space in your tank. Requires 1.75" x 1" x 2.25" high for mounting. Float switch attaches to the bracket with included cable tie allowing you to set your water level from 0-5" below the top of your tank.
|
$32 |
|
|
|
Single
Float switch has a protective PVC surround to minimize on/off switching caused by waves and protect from interference from inhabitants. It attaches to the mounting bracket with included cable ties.
|
$33 |
|
|
|
Double
Lower float switch has a protective PVC surround to minimize on/off switching caused by waves and protect from interference from inhabitants. Upper float switch mounts above providing fail-safe protection. Float switches attach to the bracket with included cable ties. |
$42 |
|
|
|
12v Pump Package
12v controller package with 12v pump. See 12v page for more details. |
$49 |
|
|
|
12v Double Pump Package
12v double float switch controller package with 12v pump. You will get one LongWire Upper and one LongWire Lower float switch. Email to request different style switches. See 12v page for more details. |
$59 |
|
|
|
12v Solenoid Package
12v controller package with 12v solenoid valve (for connecting into your reverse osmosis or household plumbing system). See 12v and solenoids pages for more details. |
$49 |
|
|
|
12v Double Solenoid Package
12v double float switch controller package with 12v solenoid valve. You will get one LongWire Upper and one LongWire Lower float switch. Email to request different style switches. See 12v page for more details. |
$59 |
|
|
|
Skimmer
Controller turns off your skimmer pump when your skimmate cup is full. 3" long stem mounts through 3/8" hole in your skimmate cup lid. Float switch detaches from controller for cup cleaning. It can also be mounted like this using a float switch holder available on our brackets page. |
$39 |
|
|
|
Horizontal
Float switch mounts through a 3/4" hole in your tank. Install so the float angles up (and is straight when your water level is low). Your water level will be permanently set ~0.2" above the top of the hole. Controller turns on power when the float is straight and turns off power when the float is up/angled. Male and female power cords are 3' long, float switch wires are 5' long. |
$39 |
|
