Reverse Osmosis Fittings & Parts. Fittings are GA Murdock brand Mur-lock fittings with dual o-rings.
|
|
Float Valve w/ Bracket
We ship these with sump brackets (which are a bit longer than the tank bracket in the picture). Measure the max thickness of the top 1" of your tank and get the size greater than or equal to that. Bracket position is adjustable, connect where you need it using the included cable ties. The arm on the float valve is adjustable.
Out of Stock
~1 week lead time |
$25 |
|
|
Diamond Drill Bit for Float Valve
11mm diamond drill bit. Drill your tank tomount a float valve. |
$3 |
|
|
Float Valve
Adjustable arm, can be mounted vertically or horizontally. 0.093" orifice, 100psi max, 1/4" jaco compression fitting, mounts through a 7/16" or 11mm hole.
Out of Stock
~1 week lead time |
$18 |
|
|
Leak Controller
Beeps and shuts off the water valve when water is detected on the two metal contacts on the bottom of the controller. Push and hold the button on the top to stop the beeping and re-open the water valve. 9v battery included. 1/4" quick connect fittings. Specifications
Out of Stock
~1 week lead time
|
$55 |
|
|
Flow-lok Leak Detector
Detector pad will absorb water and shut off water flow when a leak is detected. 1/4" tube fittings, Includes one detector pad.
|
$20 |
|
|
Flowlok Detector Pad
One replacement pad.
|
$4 |
|
|
Pressure Gauge
0-100psi (note: picture is outdated). Includes 1/4" tubing quick connect fitting.
|
$10 |
|
|
Fitting Release Tool
1/4", 3/8", 1/2"
|
$3 |
|
|
1/4" OD Tubing
ID 0.17". Commonly used in RO systems. 230psi @ 70F, 120psi @ 150F, LLDPE, natural color |
$0.20/ft |
|
|
3/8" OD Tubing
ID 0.250". 230psi @ 70F, 120psi @ 150F, LLDPE, natural color |
$0.40/ft |
|
|
1/2" OD Tubing
ID 0.375". 150psi @ 70F, 90psi @ 150F, LLDPE, natural color |
$0.60/ft |
|
|
1/4" OD Clip
Holds 2 1/4" tubes, includes 2 screws.
|
$1/ea |
|
|
1/4" Black Nylon Tubing Clamps
Includes 4 clamps.
|
$1/4pcs |
|
|
3/8" OD Clip
Holds 2 tubes, includes 2 screws.
|
$1.25/ea |
|
|
3/8" Black Nylon Tubing Clamps
Includes 4 clamps.
|
$1/4pcs |
|
|
1/2" OD Clip
Holds 2 tubes, includes 2 screws.
|
$1.50/ea |
|
|
Auto Shutoff Valve (ASV)
Needed along with a check valve to shutoff waste water when you turn off RO system's output.click here for installation diagram. |
$11.50 |
|
|
Check Valve, 1/4" Tube
0.3psi cracking pressure
|
$10 |
|
|
Check Valve, 1/2" Barb
1psi cracking pressure. Stainless steel ball and spring.
|
$10 |
|
|
1/4" Ball Valve
GA Murdock w/ dual o-rings. One handed operation
|
$5.50 |
|
|
3/8" Ball Valve
GA Murdock. Operates one-handed
|
$5.50 |
|
|
1/4" FPT Tank Ball Valve |
$5.5 |
|
|
1/4" Union Tee
GA Murdock Mur-lock with dual o-rings.
Out of Stock
1 week lead time
|
$2.50 |
|
|
3/8" Union Tee
|
$3 |
|
|
1/4" Flow Divider
|
$2.50 |
|
|
1/4" End Stop |
$1.5 |
|
|
1/4" Union
Out of Stock
~1wk lead time
|
$2 |
|
|
3/8" to 1/4" Reducing Union |
$3 |
|
|
1/4" Union (90 degree)
|
$2 |
|
|
1/4 Tube x 1/4 Stem - 90 degree
|
$2 |
|
|
3/8 to 1/4 Reducer
1/4" Tube quick connect x 3/8" stem
|
$2 |
|
|
1/2 to 3/8 Tubing Reducer
3/8" Tube quick connect x 1/2" stem
|
$3 |
|
|
1/4" Bulkhead Union
GA Murdock w/ dual o-rings. 1/4" tubing quick connect on each side. Max thickness .60", requires .70" diameter hole, o-ring to make water tight not included.
|
$3.50 |
|
|
O-ring for 1/4" Bulkhead
O-Ring for 1/4" bulkhead to make it a water tight seal. |
$0.50 |
|
|
3/8" Bulkhead Union
3/8" tubing quick connect on each side. Requires 1" diameter hole
|
$4 |
|
|
O-ring for 3/8" Bulkhead
O-Ring for 3/8" bulkhead to make it a water tight seal. |
$0.50 |
|
|
1/2" Bulkhead Union
1/2" tubing quick connect on each side. Requires 1.1" diameter hole
|
$4.50 |
|
|
O-ring for 1/2" Bulkhead
O-Ring for 1/2" bulkhead to make it a water tight seal. |
$0.50 |
|
|
1/8" MPT x 1/4" Stem |
$0.50 |
|
|
1/8" MPT X 1/4" Tube |
$1.25 |
|
|
1/8" MPT x 1/4" Barb
|
$0.75 |
|
|
1/8" MPT x 3/8" Tube
|
$2.50 |
|
|
1/4" MPT x 1/4" Tube |
$1.50 |
|
|
1/4" MPT x 1/4" Tube
90 degree |
$2 |
|
|
1/4" MPT x 1/4" Barb
|
$0.75 |
|
|
1/4" MPT x 1/2" Barb
|
$0.75 |
|
|
3/8" MPT x 1/4" Tube
|
$1.75 |
|
|
3/8" MPT x 3/8" Tube |
$2.25 |
|
|
3/8" MPT x 3/8" Barb
|
$1 |
|
|
1/2" MPT x 3/8" Tube |
$3 |
|
|
1/2" MPT x 3/8" Barb
|
$1 |
|
|
1/2" MPT x 1/2" Tube
|
$3 |
|
|
1/2" MPT x 1/2" Barb
|
$1 |
|
|
1/2" MPT x Garden Hose Male |
$1 |
|
|
1/2" stem x 1/2" barb |
$2 |
|
|
3/4" MPT x 3/4" Barb
|
$1.25 |
|
|
3/4" MPT x Garden Hose Male |
$1 |
|
|
1/8" FPT x 1/4" Tube |
$3 |
|
|
1/4" FPT x 1/4" Tube |
$3 |
|
|
1/4" FF Female Flare x 1/4" Tube |
$3 |
|
|
7/16"-24 x 1/4" Tube
Faucet or refrigerator connector |
$3 |
|
|
Female Garden Hose x
1/4" Tube
|
$4 |
|
|
Garden Hose Splitter
|
$5 |
|
|
Faucet Adapter
1/2" male to 1/2" female with 1/4" tubing quick connect. |
$6 |
|
|
Angle Stop Adapter
3/8" male to 3/8" female with 1/4" tubing quick connect. |
$6 |
|
|
Brass Saddle ValveC-style valve, fits 3/8"-5/8" with 1/4" Brass Compression |
$10 |
|
|
Drain Saddle
1.5" Drain Saddle - 1/4" tube quick connect.
|
$8 |
|
|
Pentek Sediment Filter
2.5" x 10", melt blown spun polypropylene, 1 micron. |
$4 |
|
|
1 Micron Carbon Block Filter
Omnipure OMB934-1M - 2.5" x 10" - 15,000 gallon service life
|
$13 |
|
|
Inline Carbon Filter
1/4"FPT fittings, acid washed coconut shell granular activated carbon, 2" x 10", 1yr or 1500gal.
|
$10 |
|
|
75 GPD Membrane
Pentair TLC-75. Thin Layer Composite, 100% dry membrane maximizing shelf life, High rejection stability at high input TDS
|
$45 |
|
|
75gpd Flow Restrictor
575 ml/min
|
$4 |
|
|
RO Membrane Housing
1/4" FNPT ports
|
$18 |
|
|
Slim Filter Housing
10" housing, 1/4" FNPT ports |
$18 |
|
|
Slim Filter Wrench |
$6.50 |
|
|
Standard Filter Wrench
|
$6.50 |
|
|
Single Filter Housing Bracket |
$4 |
|
|
2.5" Filter Housing Clip
|
$2 |
|
|
2" Filter Housing Clip
|
$2 |
|
|
2" Double Filter Housing Clip
|
$3.50 |
|
|
2.5" x 2" Double Filter Housing Clip
|
$4.50 |
|
|
Water Level Alarm
Two sensors. It will sound alarm if one sensor gets wet and/or the other sensor gets dry. Three LR44 batteries included.
|
$8 |
|
|
Digital TDS Meter
Also measures temperature
|
$6 |
|
|
PH Meter
Includes calibration packets and three LR44 batteries.
|
$8 |
|
|
PH Calibration Powder
|
$1.50 |
|
